Q2S Laser RADAR
Q2S Laser RADAR for multi-point structural monitoring
Measure vibration simultaneously at 65 fixed points across a structure—with no mechanical scanning.
Q2S combines remote, non-contact vibration measurement with 3D geometry to support repeatable monitoring of bridges, infrastructure and other large structures.
Measure vibration simultaneously at fixed points across the structure
Q2S uses 65 parallel channels to acquire repeatable measurements across a defined field of view. Because the points are captured simultaneously, the instrument does not rely on mechanical scanning to build the response.
Fixed measurement points
A stable optical geometry keeps the same points in view for repeatable measurements and monitoring.
Simultaneous multi-point capture
All 65 channels measure in parallel at up to 40 kHz per channel in the standard configuration.
Non-contact and remote
Observe structural response without attaching sensors to the measurement points.
From vibration response to structural health
Q2S connects dynamic response with geometry so teams can measure movement, reconstruct structural behaviour and monitor changes over time.
1. Measure
Capture vibration at 65 points simultaneously, including velocity and derived displacement.
2. Reconstruct
Use geometry-linked data to interpret spatial structural behaviour and strain.
3. Monitor
Repeat the same fixed-point measurement geometry for continuous or long-term observation.
Built for bridges and long-term structural monitoring
Q2S is designed for fixed installations where structural response must be captured repeatedly without contact. Its simultaneous channels and integrated environmental compensation support bridge, infrastructure and continuous monitoring workflows.
- Atmospheric compensation using pressure, temperature and humidity
- IP54 enclosure and 0–40 °C operating range
- Up to 240 minutes of battery operation
From velocity to displacement and strain
Q2S measures vibration velocity with a sensitivity below 50 nm/s/√Hz. Geometry-linked processing supports displacement sensitivity below 0.1 nm and strain sensitivity below 1 µstrain.
For high-speed or extended-range measurements, the modular SpeedSync configuration reaches sampling rates up to 125 MHz, velocities up to ±47.9 m/s and distances from 0.3 to 300 m.
Q2S technical specifications
Standard Q2S operation covers 0.5–50 m. Modular SpeedSync configurations extend the measurement range to 0.3–300 m.
Measurement
| Standard distance range | 0.5–50 m |
|---|---|
| Optical focus | Fixed, 0.5–50 m |
| Factory field of view | 12°, 30° or 62° |
| Vertical angular range | 30° |
| Vertical measurement points | 65–1300 |
| Parallel channels | 65 simultaneous |
| Standard sampling | 40 kHz per channel |
| Standard maximum velocity | ±155 mm/s |
Sensitivity and SpeedSync
| SpeedSync sampling | Up to 125 MHz |
|---|---|
| SpeedSync maximum velocity | ±47.9 m/s |
| SpeedSync distance range | Modular, 0.3–300 m |
| Velocity sensitivity | <50 nm/s/√Hz |
| Strain sensitivity | <1 µstrain |
| Displacement sensitivity | <0.1 nm |
| Wavelength | 1550 nm |
| Signal stability | SpeckleGuard |
System and data
| Operating temperature | 0–40 °C |
|---|---|
| Protection and laser class | IP54; Class 1M |
| Power consumption | 20 W |
| Battery operation | Up to 240 minutes |
| Dimensions | 382 × 228 × 150 mm |
| Mass | 5.0 kg without battery |
| Mount | 3.5 in–8 TPI |
| Data and software | GigE; Atelier and OmmViewer; HDF5, UFF, UNV and CSV |
Q2S questions
The essentials for evaluating a fixed-array structural monitoring workflow.
Q2S is a fixed-array Laser RADAR with 65 parallel channels for simultaneous, non-contact vibration measurement.
It measures vibration velocity and supports displacement and strain analysis linked to 3D geometry.
The brochure identifies bridges, infrastructure, buildings and other large structures, including continuous and long-term monitoring.
Plan a Q2S structural monitoring workflow
Share the structure, measurement distance and monitoring objective. We will help define the appropriate Q2S configuration.
Vragen over constructiemonitoring met Q2S
Q2S combineert gelijktijdige trillingsmeting op 65 punten met vaste geometrie voor herhaalbare constructiemonitoring.
Wat meet Q2S?
Q2S meet trillingen gelijktijdig op 65 vaste punten en koppelt de respons aan 3D-geometrie. Snelheid, afgeleide verplaatsing, ruimtelijk gedrag en rekdata ondersteunen de beoordeling van bruggen, infrastructuur en andere grote constructies.
Hoe snel en gevoelig meet Q2S?
De standaardconfiguratie registreert alle 65 kanalen parallel tot 40 kHz per kanaal. De gevoeligheid voor trillingssnelheid ligt onder 50 nm/s/√Hz; geometriegekoppelde verwerking bereikt minder dan 0,1 nm verplaatsing en minder dan 1 µstrain rek.
Hoe ondersteunt Q2S herhaalbare buitenmonitoring?
De vaste optische geometrie keert voor herhaalde of continue observatie terug naar dezelfde meetpunten. IP54-behuizing, een bereik van 0–40 °C en geïntegreerde omgevingscompensatie ondersteunen permanente installaties op bruggen en infrastructuur.
Welke afstanden en snelheden bestrijkt Q2S?
Standaard Q2S-gebruik bestrijkt 0,5–50 m. Modulaire SpeedSync-configuraties vergroten het bereik tot 0,3–300 m, de bemonstering tot 125 MHz en de meetbare snelheid tot ±47,9 m/s.
Ommatidia upgrade- en inruilprogramma
Upgrade naar Ommatidia’s nieuwste Laser RADAR-technologie en vergroot de mogelijkheden voor uw volgende meetuitdaging. Of u nu een bestaande opstelling uitbreidt of een ouder systeem vervangt, wij bieden upgradeopties op maat met kortingen tot 40%.
Gebruikt u momenteel een systeem van een andere fabrikant? Stuur ons het model en uw meetvereisten. Wij beoordelen de inruilmogelijkheden, bepalen de beste Ommatidia-configuratie en schetsen een praktisch upgradepad voor uw team.