Q2S Laser RADAR
Q2S Laser RADAR for multi-point structural monitoring
Measure vibration simultaneously at 65 fixed points across a structure—with no mechanical scanning.
Q2S combines remote, non-contact vibration measurement with 3D geometry to support repeatable monitoring of bridges, infrastructure and other large structures.
Measure vibration simultaneously at fixed points across the structure
Q2S uses 65 parallel channels to acquire repeatable measurements across a defined field of view. Because the points are captured simultaneously, the instrument does not rely on mechanical scanning to build the response.
Fixed measurement points
A stable optical geometry keeps the same points in view for repeatable measurements and monitoring.
Simultaneous multi-point capture
All 65 channels measure in parallel at up to 40 kHz per channel in the standard configuration.
Non-contact and remote
Observe structural response without attaching sensors to the measurement points.
From vibration response to structural health
Q2S connects dynamic response with geometry so teams can measure movement, reconstruct structural behaviour and monitor changes over time.
1. Measure
Capture vibration at 65 points simultaneously, including velocity and derived displacement.
2. Reconstruct
Use geometry-linked data to interpret spatial structural behaviour and strain.
3. Monitor
Repeat the same fixed-point measurement geometry for continuous or long-term observation.
Built for bridges and long-term structural monitoring
Q2S is designed for fixed installations where structural response must be captured repeatedly without contact. Its simultaneous channels and integrated environmental compensation support bridge, infrastructure and continuous monitoring workflows.
- Atmospheric compensation using pressure, temperature and humidity
- IP54 enclosure and 0–40 °C operating range
- Up to 240 minutes of battery operation
From velocity to displacement and strain
Q2S measures vibration velocity with a sensitivity below 50 nm/s/√Hz. Geometry-linked processing supports displacement sensitivity below 0.1 nm and strain sensitivity below 1 µstrain.
For high-speed or extended-range measurements, the modular SpeedSync configuration reaches sampling rates up to 125 MHz, velocities up to ±47.9 m/s and distances from 0.3 to 300 m.
Q2S technical specifications
Standard Q2S operation covers 0.5–50 m. Modular SpeedSync configurations extend the measurement range to 0.3–300 m.
Measurement
| Standard distance range | 0.5–50 m |
|---|---|
| Optical focus | Fixed, 0.5–50 m |
| Factory field of view | 12°, 30° or 62° |
| Vertical angular range | 30° |
| Vertical measurement points | 65–1300 |
| Parallel channels | 65 simultaneous |
| Standard sampling | 40 kHz per channel |
| Standard maximum velocity | ±155 mm/s |
Sensitivity and SpeedSync
| SpeedSync sampling | Up to 125 MHz |
|---|---|
| SpeedSync maximum velocity | ±47.9 m/s |
| SpeedSync distance range | Modular, 0.3–300 m |
| Velocity sensitivity | <50 nm/s/√Hz |
| Strain sensitivity | <1 µstrain |
| Displacement sensitivity | <0.1 nm |
| Wavelength | 1550 nm |
| Signal stability | SpeckleGuard |
System and data
| Operating temperature | 0–40 °C |
|---|---|
| Protection and laser class | IP54; Class 1M |
| Power consumption | 20 W |
| Battery operation | Up to 240 minutes |
| Dimensions | 382 × 228 × 150 mm |
| Mass | 5.0 kg without battery |
| Mount | 3.5 in–8 TPI |
| Data and software | GigE; Atelier and OmmViewer; HDF5, UFF, UNV and CSV |
Q2S questions
The essentials for evaluating a fixed-array structural monitoring workflow.
Q2S is a fixed-array Laser RADAR with 65 parallel channels for simultaneous, non-contact vibration measurement.
It measures vibration velocity and supports displacement and strain analysis linked to 3D geometry.
The brochure identifies bridges, infrastructure, buildings and other large structures, including continuous and long-term monitoring.
Plan a Q2S structural monitoring workflow
Share the structure, measurement distance and monitoring objective. We will help define the appropriate Q2S configuration.
Questions sur la surveillance structurelle avec Q2S
Q2S associe mesure vibratoire simultanée en 65 points et géométrie fixe pour une surveillance structurelle répétable.
Que mesure Q2S ?
Q2S mesure les vibrations simultanément en 65 points fixes et relie la réponse à la géométrie 3D. Vitesse, déplacement dérivé, comportement spatial et données de déformation servent à évaluer ponts, infrastructures et autres grands ouvrages.
À quelle vitesse et avec quelle sensibilité Q2S mesure-t-il ?
La configuration standard acquiert les 65 canaux en parallèle jusqu’à 40 kHz par canal. La sensibilité en vitesse est inférieure à 50 nm/s/√Hz ; le traitement lié à la géométrie atteint moins de 0,1 nm en déplacement et moins de 1 µstrain en déformation.
Comment Q2S assure-t-il une surveillance extérieure répétable ?
La géométrie optique fixe retrouve les mêmes points pour une observation répétée ou continue. Le boîtier IP54, la plage de 0–40 °C et la compensation environnementale intégrée accompagnent les installations permanentes sur ponts et infrastructures.
Quelles distances et vitesses Q2S couvre-t-il ?
Le fonctionnement standard couvre 0,5–50 m. Les configurations modulaires SpeedSync étendent la portée à 0,3–300 m, l’échantillonnage à 125 MHz et la vitesse mesurable à ±47,9 m/s.