ATELIER u00b7 Q-SERIES ACQUISITION SOFTWARE
Atelier: guided Q-Series data capture
Set up the scan, align the target and check the measurement while it runs. Atelier saves a structured Q-Series HDF5 record, ready for review in OmmH5Viewer.
Configure the scan. Check the target. Save a usable HDF5 measurement record.
SET UP THE MEASUREMENT
Define the scan before acquisition
Set the measurement geometry and acquisition parameters in the same workspace used to run the test.
Configure the scan
Set start and stop angles, angular step, channel range, focus and scan type before the acquisition begins.
Align before capture
Use the alignment camera, virtual points, sphere search and fiducial tools to confirm the target position.
Save into HDF5
Record the measured channels, scan settings and acquisition context in HDF5 for review and processing.
DURING ACQUISITION
Review signals, intensity and geometry at test time
Review vibrometry signals, intensity and modal views during acquisition. This makes it possible to correct alignment, coverage or signal quality before the test is finished.
Inspect the point cloud alongside the measurement so the scanned scene remains visible during the capture workflow.
After acquisition, use OmmH5Viewer for analysis, visualisation and export.
TOOLS AVAILABLE DURING CAPTURE
Keep practical checks within reach
Use the capture workspace to verify the target, the signal and the data being recorded before moving on.
Simulate & Preview
Use camera and intensity views to locate the region of interest, run a mini-scan and confirm the centre before the main measurement.
Acquire & Validate
Inspect live signals and compare phase, real, imaginary and magnitude views while the measurement is running.
Replay & Utilize
Reopen recorded acquisitions with the setup and results together, ready for review, traceability and downstream analysis.
Q-SERIES SOFTWARE WORKFLOW
Set up, capture and validate in one workspace
Atelier brings scan configuration, target alignment and live measurement views together while you run the test. It saves the structured Q-Series HDF5 dataset for subsequent analysis.
For spectrum, mode-shape and export work, continue in OmmH5Viewer. See the complete Q-Series capture-to-analysis workflow.
Plan the capture workflow before test day
Bring the target, measurement range and required output to a technical review. We will help define the Q-Series acquisition workflow.
Request an Atelier evaluation version
Tell us what you need to measure and the Q-Series configuration you want to evaluate. We will review the request and contact you about the appropriate access route.